|
@@ -0,0 +1,798 @@
|
|
|
+# -----------------------------
|
|
|
+# PostgreSQL configuration file
|
|
|
+# -----------------------------
|
|
|
+#
|
|
|
+# This file consists of lines of the form:
|
|
|
+#
|
|
|
+# name = value
|
|
|
+#
|
|
|
+# (The "=" is optional.) Whitespace may be used. Comments are introduced with
|
|
|
+# "#" anywhere on a line. The complete list of parameter names and allowed
|
|
|
+# values can be found in the PostgreSQL documentation.
|
|
|
+#
|
|
|
+# The commented-out settings shown in this file represent the default values.
|
|
|
+# Re-commenting a setting is NOT sufficient to revert it to the default value;
|
|
|
+# you need to reload the server.
|
|
|
+#
|
|
|
+# This file is read on server startup and when the server receives a SIGHUP
|
|
|
+# signal. If you edit the file on a running system, you have to SIGHUP the
|
|
|
+# server for the changes to take effect, run "pg_ctl reload", or execute
|
|
|
+# "SELECT pg_reload_conf()". Some parameters, which are marked below,
|
|
|
+# require a server shutdown and restart to take effect.
|
|
|
+#
|
|
|
+# Any parameter can also be given as a command-line option to the server, e.g.,
|
|
|
+# "postgres -c log_connections=on". Some parameters can be changed at run time
|
|
|
+# with the "SET" SQL command.
|
|
|
+#
|
|
|
+# Memory units: B = bytes Time units: us = microseconds
|
|
|
+# kB = kilobytes ms = milliseconds
|
|
|
+# MB = megabytes s = seconds
|
|
|
+# GB = gigabytes min = minutes
|
|
|
+# TB = terabytes h = hours
|
|
|
+# d = days
|
|
|
+
|
|
|
+
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+# FILE LOCATIONS
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+
|
|
|
+# The default values of these variables are driven from the -D command-line
|
|
|
+# option or PGDATA environment variable, represented here as ConfigDir.
|
|
|
+
|
|
|
+#data_directory = 'ConfigDir' # use data in another directory
|
|
|
+ # (change requires restart)
|
|
|
+#hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file
|
|
|
+ # (change requires restart)
|
|
|
+#ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file
|
|
|
+ # (change requires restart)
|
|
|
+
|
|
|
+# If external_pid_file is not explicitly set, no extra PID file is written.
|
|
|
+#external_pid_file = '' # write an extra PID file
|
|
|
+ # (change requires restart)
|
|
|
+
|
|
|
+
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+# CONNECTIONS AND AUTHENTICATION
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+
|
|
|
+# - Connection Settings -
|
|
|
+
|
|
|
+listen_addresses = '*'
|
|
|
+ # comma-separated list of addresses;
|
|
|
+ # defaults to 'localhost'; use '*' for all
|
|
|
+ # (change requires restart)
|
|
|
+#port = 5432 # (change requires restart)
|
|
|
+max_connections = 100 # (change requires restart)
|
|
|
+#superuser_reserved_connections = 3 # (change requires restart)
|
|
|
+#unix_socket_directories = '/var/run/postgresql' # comma-separated list of directories
|
|
|
+ # (change requires restart)
|
|
|
+#unix_socket_group = '' # (change requires restart)
|
|
|
+#unix_socket_permissions = 0777 # begin with 0 to use octal notation
|
|
|
+ # (change requires restart)
|
|
|
+#bonjour = off # advertise server via Bonjour
|
|
|
+ # (change requires restart)
|
|
|
+#bonjour_name = '' # defaults to the computer name
|
|
|
+ # (change requires restart)
|
|
|
+
|
|
|
+# - TCP settings -
|
|
|
+# see "man tcp" for details
|
|
|
+
|
|
|
+#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds;
|
|
|
+ # 0 selects the system default
|
|
|
+#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds;
|
|
|
+ # 0 selects the system default
|
|
|
+#tcp_keepalives_count = 0 # TCP_KEEPCNT;
|
|
|
+ # 0 selects the system default
|
|
|
+#tcp_user_timeout = 0 # TCP_USER_TIMEOUT, in milliseconds;
|
|
|
+ # 0 selects the system default
|
|
|
+
|
|
|
+#client_connection_check_interval = 0 # time between checks for client
|
|
|
+ # disconnection while running queries;
|
|
|
+ # 0 for never
|
|
|
+
|
|
|
+# - Authentication -
|
|
|
+
|
|
|
+#authentication_timeout = 1min # 1s-600s
|
|
|
+#password_encryption = scram-sha-256 # scram-sha-256 or md5
|
|
|
+#db_user_namespace = off
|
|
|
+
|
|
|
+# GSSAPI using Kerberos
|
|
|
+#krb_server_keyfile = 'FILE:${sysconfdir}/krb5.keytab'
|
|
|
+#krb_caseins_users = off
|
|
|
+
|
|
|
+# - SSL -
|
|
|
+
|
|
|
+#ssl = off
|
|
|
+#ssl_ca_file = ''
|
|
|
+#ssl_cert_file = 'server.crt'
|
|
|
+#ssl_crl_file = ''
|
|
|
+#ssl_crl_dir = ''
|
|
|
+#ssl_key_file = 'server.key'
|
|
|
+#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers
|
|
|
+#ssl_prefer_server_ciphers = on
|
|
|
+#ssl_ecdh_curve = 'prime256v1'
|
|
|
+#ssl_min_protocol_version = 'TLSv1.2'
|
|
|
+#ssl_max_protocol_version = ''
|
|
|
+#ssl_dh_params_file = ''
|
|
|
+#ssl_passphrase_command = ''
|
|
|
+#ssl_passphrase_command_supports_reload = off
|
|
|
+
|
|
|
+
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+# RESOURCE USAGE (except WAL)
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+
|
|
|
+# - Memory -
|
|
|
+
|
|
|
+shared_buffers = 128MB # min 128kB
|
|
|
+ # (change requires restart)
|
|
|
+#huge_pages = try # on, off, or try
|
|
|
+ # (change requires restart)
|
|
|
+#huge_page_size = 0 # zero for system default
|
|
|
+ # (change requires restart)
|
|
|
+#temp_buffers = 8MB # min 800kB
|
|
|
+#max_prepared_transactions = 0 # zero disables the feature
|
|
|
+ # (change requires restart)
|
|
|
+# Caution: it is not advisable to set max_prepared_transactions nonzero unless
|
|
|
+# you actively intend to use prepared transactions.
|
|
|
+#work_mem = 4MB # min 64kB
|
|
|
+#hash_mem_multiplier = 1.0 # 1-1000.0 multiplier on hash table work_mem
|
|
|
+#maintenance_work_mem = 64MB # min 1MB
|
|
|
+#autovacuum_work_mem = -1 # min 1MB, or -1 to use maintenance_work_mem
|
|
|
+#logical_decoding_work_mem = 64MB # min 64kB
|
|
|
+#max_stack_depth = 2MB # min 100kB
|
|
|
+#shared_memory_type = mmap # the default is the first option
|
|
|
+ # supported by the operating system:
|
|
|
+ # mmap
|
|
|
+ # sysv
|
|
|
+ # windows
|
|
|
+ # (change requires restart)
|
|
|
+dynamic_shared_memory_type = posix # the default is the first option
|
|
|
+ # supported by the operating system:
|
|
|
+ # posix
|
|
|
+ # sysv
|
|
|
+ # windows
|
|
|
+ # mmap
|
|
|
+ # (change requires restart)
|
|
|
+#min_dynamic_shared_memory = 0MB # (change requires restart)
|
|
|
+
|
|
|
+# - Disk -
|
|
|
+
|
|
|
+#temp_file_limit = -1 # limits per-process temp file space
|
|
|
+ # in kilobytes, or -1 for no limit
|
|
|
+
|
|
|
+# - Kernel Resources -
|
|
|
+
|
|
|
+#max_files_per_process = 1000 # min 64
|
|
|
+ # (change requires restart)
|
|
|
+
|
|
|
+# - Cost-Based Vacuum Delay -
|
|
|
+
|
|
|
+#vacuum_cost_delay = 0 # 0-100 milliseconds (0 disables)
|
|
|
+#vacuum_cost_page_hit = 1 # 0-10000 credits
|
|
|
+#vacuum_cost_page_miss = 2 # 0-10000 credits
|
|
|
+#vacuum_cost_page_dirty = 20 # 0-10000 credits
|
|
|
+#vacuum_cost_limit = 200 # 1-10000 credits
|
|
|
+
|
|
|
+# - Background Writer -
|
|
|
+
|
|
|
+#bgwriter_delay = 200ms # 10-10000ms between rounds
|
|
|
+#bgwriter_lru_maxpages = 100 # max buffers written/round, 0 disables
|
|
|
+#bgwriter_lru_multiplier = 2.0 # 0-10.0 multiplier on buffers scanned/round
|
|
|
+#bgwriter_flush_after = 512kB # measured in pages, 0 disables
|
|
|
+
|
|
|
+# - Asynchronous Behavior -
|
|
|
+
|
|
|
+#backend_flush_after = 0 # measured in pages, 0 disables
|
|
|
+#effective_io_concurrency = 1 # 1-1000; 0 disables prefetching
|
|
|
+#maintenance_io_concurrency = 10 # 1-1000; 0 disables prefetching
|
|
|
+#max_worker_processes = 8 # (change requires restart)
|
|
|
+#max_parallel_workers_per_gather = 2 # taken from max_parallel_workers
|
|
|
+#max_parallel_maintenance_workers = 2 # taken from max_parallel_workers
|
|
|
+#max_parallel_workers = 8 # maximum number of max_worker_processes that
|
|
|
+ # can be used in parallel operations
|
|
|
+#parallel_leader_participation = on
|
|
|
+#old_snapshot_threshold = -1 # 1min-60d; -1 disables; 0 is immediate
|
|
|
+ # (change requires restart)
|
|
|
+
|
|
|
+
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+# WRITE-AHEAD LOG
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+
|
|
|
+# - Settings -
|
|
|
+
|
|
|
+#wal_level = replica # minimal, replica, or logical
|
|
|
+ # (change requires restart)
|
|
|
+#fsync = on # flush data to disk for crash safety
|
|
|
+ # (turning this off can cause
|
|
|
+ # unrecoverable data corruption)
|
|
|
+#synchronous_commit = on # synchronization level;
|
|
|
+ # off, local, remote_write, remote_apply, or on
|
|
|
+#wal_sync_method = fsync # the default is the first option
|
|
|
+ # supported by the operating system:
|
|
|
+ # open_datasync
|
|
|
+ # fdatasync (default on Linux and FreeBSD)
|
|
|
+ # fsync
|
|
|
+ # fsync_writethrough
|
|
|
+ # open_sync
|
|
|
+#full_page_writes = on # recover from partial page writes
|
|
|
+#wal_log_hints = off # also do full page writes of non-critical updates
|
|
|
+ # (change requires restart)
|
|
|
+#wal_compression = off # enable compression of full-page writes
|
|
|
+#wal_init_zero = on # zero-fill new WAL files
|
|
|
+#wal_recycle = on # recycle WAL files
|
|
|
+#wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers
|
|
|
+ # (change requires restart)
|
|
|
+#wal_writer_delay = 200ms # 1-10000 milliseconds
|
|
|
+#wal_writer_flush_after = 1MB # measured in pages, 0 disables
|
|
|
+#wal_skip_threshold = 2MB
|
|
|
+
|
|
|
+#commit_delay = 0 # range 0-100000, in microseconds
|
|
|
+#commit_siblings = 5 # range 1-1000
|
|
|
+
|
|
|
+# - Checkpoints -
|
|
|
+
|
|
|
+#checkpoint_timeout = 5min # range 30s-1d
|
|
|
+#checkpoint_completion_target = 0.9 # checkpoint target duration, 0.0 - 1.0
|
|
|
+#checkpoint_flush_after = 256kB # measured in pages, 0 disables
|
|
|
+#checkpoint_warning = 30s # 0 disables
|
|
|
+max_wal_size = 1GB
|
|
|
+min_wal_size = 80MB
|
|
|
+
|
|
|
+# - Archiving -
|
|
|
+
|
|
|
+#archive_mode = off # enables archiving; off, on, or always
|
|
|
+ # (change requires restart)
|
|
|
+#archive_command = '' # command to use to archive a logfile segment
|
|
|
+ # placeholders: %p = path of file to archive
|
|
|
+ # %f = file name only
|
|
|
+ # e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f'
|
|
|
+#archive_timeout = 0 # force a logfile segment switch after this
|
|
|
+ # number of seconds; 0 disables
|
|
|
+
|
|
|
+# - Archive Recovery -
|
|
|
+
|
|
|
+# These are only used in recovery mode.
|
|
|
+
|
|
|
+#restore_command = '' # command to use to restore an archived logfile segment
|
|
|
+ # placeholders: %p = path of file to restore
|
|
|
+ # %f = file name only
|
|
|
+ # e.g. 'cp /mnt/server/archivedir/%f %p'
|
|
|
+#archive_cleanup_command = '' # command to execute at every restartpoint
|
|
|
+#recovery_end_command = '' # command to execute at completion of recovery
|
|
|
+
|
|
|
+# - Recovery Target -
|
|
|
+
|
|
|
+# Set these only when performing a targeted recovery.
|
|
|
+
|
|
|
+#recovery_target = '' # 'immediate' to end recovery as soon as a
|
|
|
+ # consistent state is reached
|
|
|
+ # (change requires restart)
|
|
|
+#recovery_target_name = '' # the named restore point to which recovery will proceed
|
|
|
+ # (change requires restart)
|
|
|
+#recovery_target_time = '' # the time stamp up to which recovery will proceed
|
|
|
+ # (change requires restart)
|
|
|
+#recovery_target_xid = '' # the transaction ID up to which recovery will proceed
|
|
|
+ # (change requires restart)
|
|
|
+#recovery_target_lsn = '' # the WAL LSN up to which recovery will proceed
|
|
|
+ # (change requires restart)
|
|
|
+#recovery_target_inclusive = on # Specifies whether to stop:
|
|
|
+ # just after the specified recovery target (on)
|
|
|
+ # just before the recovery target (off)
|
|
|
+ # (change requires restart)
|
|
|
+#recovery_target_timeline = 'latest' # 'current', 'latest', or timeline ID
|
|
|
+ # (change requires restart)
|
|
|
+#recovery_target_action = 'pause' # 'pause', 'promote', 'shutdown'
|
|
|
+ # (change requires restart)
|
|
|
+
|
|
|
+
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+# REPLICATION
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+
|
|
|
+# - Sending Servers -
|
|
|
+
|
|
|
+# Set these on the primary and on any standby that will send replication data.
|
|
|
+
|
|
|
+#max_wal_senders = 10 # max number of walsender processes
|
|
|
+ # (change requires restart)
|
|
|
+#max_replication_slots = 10 # max number of replication slots
|
|
|
+ # (change requires restart)
|
|
|
+#wal_keep_size = 0 # in megabytes; 0 disables
|
|
|
+#max_slot_wal_keep_size = -1 # in megabytes; -1 disables
|
|
|
+#wal_sender_timeout = 60s # in milliseconds; 0 disables
|
|
|
+#track_commit_timestamp = off # collect timestamp of transaction commit
|
|
|
+ # (change requires restart)
|
|
|
+
|
|
|
+# - Primary Server -
|
|
|
+
|
|
|
+# These settings are ignored on a standby server.
|
|
|
+
|
|
|
+#synchronous_standby_names = '' # standby servers that provide sync rep
|
|
|
+ # method to choose sync standbys, number of sync standbys,
|
|
|
+ # and comma-separated list of application_name
|
|
|
+ # from standby(s); '*' = all
|
|
|
+#vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed
|
|
|
+
|
|
|
+# - Standby Servers -
|
|
|
+
|
|
|
+# These settings are ignored on a primary server.
|
|
|
+
|
|
|
+#primary_conninfo = '' # connection string to sending server
|
|
|
+#primary_slot_name = '' # replication slot on sending server
|
|
|
+#promote_trigger_file = '' # file name whose presence ends recovery
|
|
|
+#hot_standby = on # "off" disallows queries during recovery
|
|
|
+ # (change requires restart)
|
|
|
+#max_standby_archive_delay = 30s # max delay before canceling queries
|
|
|
+ # when reading WAL from archive;
|
|
|
+ # -1 allows indefinite delay
|
|
|
+#max_standby_streaming_delay = 30s # max delay before canceling queries
|
|
|
+ # when reading streaming WAL;
|
|
|
+ # -1 allows indefinite delay
|
|
|
+#wal_receiver_create_temp_slot = off # create temp slot if primary_slot_name
|
|
|
+ # is not set
|
|
|
+#wal_receiver_status_interval = 10s # send replies at least this often
|
|
|
+ # 0 disables
|
|
|
+#hot_standby_feedback = off # send info from standby to prevent
|
|
|
+ # query conflicts
|
|
|
+#wal_receiver_timeout = 60s # time that receiver waits for
|
|
|
+ # communication from primary
|
|
|
+ # in milliseconds; 0 disables
|
|
|
+#wal_retrieve_retry_interval = 5s # time to wait before retrying to
|
|
|
+ # retrieve WAL after a failed attempt
|
|
|
+#recovery_min_apply_delay = 0 # minimum delay for applying changes during recovery
|
|
|
+
|
|
|
+# - Subscribers -
|
|
|
+
|
|
|
+# These settings are ignored on a publisher.
|
|
|
+
|
|
|
+#max_logical_replication_workers = 4 # taken from max_worker_processes
|
|
|
+ # (change requires restart)
|
|
|
+#max_sync_workers_per_subscription = 2 # taken from max_logical_replication_workers
|
|
|
+
|
|
|
+
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+# QUERY TUNING
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+
|
|
|
+# - Planner Method Configuration -
|
|
|
+
|
|
|
+#enable_async_append = on
|
|
|
+#enable_bitmapscan = on
|
|
|
+#enable_gathermerge = on
|
|
|
+#enable_hashagg = on
|
|
|
+#enable_hashjoin = on
|
|
|
+#enable_incremental_sort = on
|
|
|
+#enable_indexscan = on
|
|
|
+#enable_indexonlyscan = on
|
|
|
+#enable_material = on
|
|
|
+#enable_memoize = on
|
|
|
+#enable_mergejoin = on
|
|
|
+#enable_nestloop = on
|
|
|
+#enable_parallel_append = on
|
|
|
+#enable_parallel_hash = on
|
|
|
+#enable_partition_pruning = on
|
|
|
+#enable_partitionwise_join = off
|
|
|
+#enable_partitionwise_aggregate = off
|
|
|
+#enable_seqscan = on
|
|
|
+#enable_sort = on
|
|
|
+#enable_tidscan = on
|
|
|
+
|
|
|
+# - Planner Cost Constants -
|
|
|
+
|
|
|
+#seq_page_cost = 1.0 # measured on an arbitrary scale
|
|
|
+#random_page_cost = 4.0 # same scale as above
|
|
|
+#cpu_tuple_cost = 0.01 # same scale as above
|
|
|
+#cpu_index_tuple_cost = 0.005 # same scale as above
|
|
|
+#cpu_operator_cost = 0.0025 # same scale as above
|
|
|
+#parallel_setup_cost = 1000.0 # same scale as above
|
|
|
+#parallel_tuple_cost = 0.1 # same scale as above
|
|
|
+#min_parallel_table_scan_size = 8MB
|
|
|
+#min_parallel_index_scan_size = 512kB
|
|
|
+#effective_cache_size = 4GB
|
|
|
+
|
|
|
+#jit_above_cost = 100000 # perform JIT compilation if available
|
|
|
+ # and query more expensive than this;
|
|
|
+ # -1 disables
|
|
|
+#jit_inline_above_cost = 500000 # inline small functions if query is
|
|
|
+ # more expensive than this; -1 disables
|
|
|
+#jit_optimize_above_cost = 500000 # use expensive JIT optimizations if
|
|
|
+ # query is more expensive than this;
|
|
|
+ # -1 disables
|
|
|
+
|
|
|
+# - Genetic Query Optimizer -
|
|
|
+
|
|
|
+#geqo = on
|
|
|
+#geqo_threshold = 12
|
|
|
+#geqo_effort = 5 # range 1-10
|
|
|
+#geqo_pool_size = 0 # selects default based on effort
|
|
|
+#geqo_generations = 0 # selects default based on effort
|
|
|
+#geqo_selection_bias = 2.0 # range 1.5-2.0
|
|
|
+#geqo_seed = 0.0 # range 0.0-1.0
|
|
|
+
|
|
|
+# - Other Planner Options -
|
|
|
+
|
|
|
+#default_statistics_target = 100 # range 1-10000
|
|
|
+#constraint_exclusion = partition # on, off, or partition
|
|
|
+#cursor_tuple_fraction = 0.1 # range 0.0-1.0
|
|
|
+#from_collapse_limit = 8
|
|
|
+#jit = on # allow JIT compilation
|
|
|
+#join_collapse_limit = 8 # 1 disables collapsing of explicit
|
|
|
+ # JOIN clauses
|
|
|
+#plan_cache_mode = auto # auto, force_generic_plan or
|
|
|
+ # force_custom_plan
|
|
|
+
|
|
|
+
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+# REPORTING AND LOGGING
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+
|
|
|
+# - Where to Log -
|
|
|
+
|
|
|
+#log_destination = 'stderr' # Valid values are combinations of
|
|
|
+ # stderr, csvlog, syslog, and eventlog,
|
|
|
+ # depending on platform. csvlog
|
|
|
+ # requires logging_collector to be on.
|
|
|
+
|
|
|
+# This is used when logging to stderr:
|
|
|
+#logging_collector = off # Enable capturing of stderr and csvlog
|
|
|
+ # into log files. Required to be on for
|
|
|
+ # csvlogs.
|
|
|
+ # (change requires restart)
|
|
|
+
|
|
|
+# These are only used if logging_collector is on:
|
|
|
+#log_directory = 'log' # directory where log files are written,
|
|
|
+ # can be absolute or relative to PGDATA
|
|
|
+#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern,
|
|
|
+ # can include strftime() escapes
|
|
|
+#log_file_mode = 0600 # creation mode for log files,
|
|
|
+ # begin with 0 to use octal notation
|
|
|
+#log_rotation_age = 1d # Automatic rotation of logfiles will
|
|
|
+ # happen after that time. 0 disables.
|
|
|
+#log_rotation_size = 10MB # Automatic rotation of logfiles will
|
|
|
+ # happen after that much log output.
|
|
|
+ # 0 disables.
|
|
|
+#log_truncate_on_rotation = off # If on, an existing log file with the
|
|
|
+ # same name as the new log file will be
|
|
|
+ # truncated rather than appended to.
|
|
|
+ # But such truncation only occurs on
|
|
|
+ # time-driven rotation, not on restarts
|
|
|
+ # or size-driven rotation. Default is
|
|
|
+ # off, meaning append to existing files
|
|
|
+ # in all cases.
|
|
|
+
|
|
|
+# These are relevant when logging to syslog:
|
|
|
+#syslog_facility = 'LOCAL0'
|
|
|
+#syslog_ident = 'postgres'
|
|
|
+#syslog_sequence_numbers = on
|
|
|
+#syslog_split_messages = on
|
|
|
+
|
|
|
+# This is only relevant when logging to eventlog (Windows):
|
|
|
+# (change requires restart)
|
|
|
+#event_source = 'PostgreSQL'
|
|
|
+
|
|
|
+# - When to Log -
|
|
|
+
|
|
|
+#log_min_messages = warning # values in order of decreasing detail:
|
|
|
+ # debug5
|
|
|
+ # debug4
|
|
|
+ # debug3
|
|
|
+ # debug2
|
|
|
+ # debug1
|
|
|
+ # info
|
|
|
+ # notice
|
|
|
+ # warning
|
|
|
+ # error
|
|
|
+ # log
|
|
|
+ # fatal
|
|
|
+ # panic
|
|
|
+
|
|
|
+#log_min_error_statement = error # values in order of decreasing detail:
|
|
|
+ # debug5
|
|
|
+ # debug4
|
|
|
+ # debug3
|
|
|
+ # debug2
|
|
|
+ # debug1
|
|
|
+ # info
|
|
|
+ # notice
|
|
|
+ # warning
|
|
|
+ # error
|
|
|
+ # log
|
|
|
+ # fatal
|
|
|
+ # panic (effectively off)
|
|
|
+
|
|
|
+#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements
|
|
|
+ # and their durations, > 0 logs only
|
|
|
+ # statements running at least this number
|
|
|
+ # of milliseconds
|
|
|
+
|
|
|
+#log_min_duration_sample = -1 # -1 is disabled, 0 logs a sample of statements
|
|
|
+ # and their durations, > 0 logs only a sample of
|
|
|
+ # statements running at least this number
|
|
|
+ # of milliseconds;
|
|
|
+ # sample fraction is determined by log_statement_sample_rate
|
|
|
+
|
|
|
+#log_statement_sample_rate = 1.0 # fraction of logged statements exceeding
|
|
|
+ # log_min_duration_sample to be logged;
|
|
|
+ # 1.0 logs all such statements, 0.0 never logs
|
|
|
+
|
|
|
+
|
|
|
+#log_transaction_sample_rate = 0.0 # fraction of transactions whose statements
|
|
|
+ # are logged regardless of their duration; 1.0 logs all
|
|
|
+ # statements from all transactions, 0.0 never logs
|
|
|
+
|
|
|
+# - What to Log -
|
|
|
+
|
|
|
+#debug_print_parse = off
|
|
|
+#debug_print_rewritten = off
|
|
|
+#debug_print_plan = off
|
|
|
+#debug_pretty_print = on
|
|
|
+#log_autovacuum_min_duration = -1 # log autovacuum activity;
|
|
|
+ # -1 disables, 0 logs all actions and
|
|
|
+ # their durations, > 0 logs only
|
|
|
+ # actions running at least this number
|
|
|
+ # of milliseconds.
|
|
|
+#log_checkpoints = off
|
|
|
+#log_connections = off
|
|
|
+#log_disconnections = off
|
|
|
+#log_duration = off
|
|
|
+#log_error_verbosity = default # terse, default, or verbose messages
|
|
|
+#log_hostname = off
|
|
|
+#log_line_prefix = '%m [%p] ' # special values:
|
|
|
+ # %a = application name
|
|
|
+ # %u = user name
|
|
|
+ # %d = database name
|
|
|
+ # %r = remote host and port
|
|
|
+ # %h = remote host
|
|
|
+ # %b = backend type
|
|
|
+ # %p = process ID
|
|
|
+ # %P = process ID of parallel group leader
|
|
|
+ # %t = timestamp without milliseconds
|
|
|
+ # %m = timestamp with milliseconds
|
|
|
+ # %n = timestamp with milliseconds (as a Unix epoch)
|
|
|
+ # %Q = query ID (0 if none or not computed)
|
|
|
+ # %i = command tag
|
|
|
+ # %e = SQL state
|
|
|
+ # %c = session ID
|
|
|
+ # %l = session line number
|
|
|
+ # %s = session start timestamp
|
|
|
+ # %v = virtual transaction ID
|
|
|
+ # %x = transaction ID (0 if none)
|
|
|
+ # %q = stop here in non-session
|
|
|
+ # processes
|
|
|
+ # %% = '%'
|
|
|
+ # e.g. '<%u%%%d> '
|
|
|
+#log_lock_waits = off # log lock waits >= deadlock_timeout
|
|
|
+#log_recovery_conflict_waits = off # log standby recovery conflict waits
|
|
|
+ # >= deadlock_timeout
|
|
|
+#log_parameter_max_length = -1 # when logging statements, limit logged
|
|
|
+ # bind-parameter values to N bytes;
|
|
|
+ # -1 means print in full, 0 disables
|
|
|
+#log_parameter_max_length_on_error = 0 # when logging an error, limit logged
|
|
|
+ # bind-parameter values to N bytes;
|
|
|
+ # -1 means print in full, 0 disables
|
|
|
+#log_statement = 'none' # none, ddl, mod, all
|
|
|
+#log_replication_commands = off
|
|
|
+#log_temp_files = -1 # log temporary files equal or larger
|
|
|
+ # than the specified size in kilobytes;
|
|
|
+ # -1 disables, 0 logs all temp files
|
|
|
+log_timezone = 'Etc/UTC'
|
|
|
+
|
|
|
+
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+# PROCESS TITLE
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+
|
|
|
+#cluster_name = '' # added to process titles if nonempty
|
|
|
+ # (change requires restart)
|
|
|
+#update_process_title = on
|
|
|
+
|
|
|
+
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+# STATISTICS
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+
|
|
|
+# - Query and Index Statistics Collector -
|
|
|
+
|
|
|
+#track_activities = on
|
|
|
+#track_activity_query_size = 1024 # (change requires restart)
|
|
|
+#track_counts = on
|
|
|
+#track_io_timing = off
|
|
|
+#track_wal_io_timing = off
|
|
|
+#track_functions = none # none, pl, all
|
|
|
+#stats_temp_directory = 'pg_stat_tmp'
|
|
|
+
|
|
|
+
|
|
|
+# - Monitoring -
|
|
|
+
|
|
|
+#compute_query_id = auto
|
|
|
+#log_statement_stats = off
|
|
|
+#log_parser_stats = off
|
|
|
+#log_planner_stats = off
|
|
|
+#log_executor_stats = off
|
|
|
+
|
|
|
+
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+# AUTOVACUUM
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+
|
|
|
+#autovacuum = on # Enable autovacuum subprocess? 'on'
|
|
|
+ # requires track_counts to also be on.
|
|
|
+#autovacuum_max_workers = 3 # max number of autovacuum subprocesses
|
|
|
+ # (change requires restart)
|
|
|
+#autovacuum_naptime = 1min # time between autovacuum runs
|
|
|
+#autovacuum_vacuum_threshold = 50 # min number of row updates before
|
|
|
+ # vacuum
|
|
|
+#autovacuum_vacuum_insert_threshold = 1000 # min number of row inserts
|
|
|
+ # before vacuum; -1 disables insert
|
|
|
+ # vacuums
|
|
|
+#autovacuum_analyze_threshold = 50 # min number of row updates before
|
|
|
+ # analyze
|
|
|
+#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum
|
|
|
+#autovacuum_vacuum_insert_scale_factor = 0.2 # fraction of inserts over table
|
|
|
+ # size before insert vacuum
|
|
|
+#autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze
|
|
|
+#autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum
|
|
|
+ # (change requires restart)
|
|
|
+#autovacuum_multixact_freeze_max_age = 400000000 # maximum multixact age
|
|
|
+ # before forced vacuum
|
|
|
+ # (change requires restart)
|
|
|
+#autovacuum_vacuum_cost_delay = 2ms # default vacuum cost delay for
|
|
|
+ # autovacuum, in milliseconds;
|
|
|
+ # -1 means use vacuum_cost_delay
|
|
|
+#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for
|
|
|
+ # autovacuum, -1 means use
|
|
|
+ # vacuum_cost_limit
|
|
|
+
|
|
|
+
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+# CLIENT CONNECTION DEFAULTS
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+
|
|
|
+# - Statement Behavior -
|
|
|
+
|
|
|
+#client_min_messages = notice # values in order of decreasing detail:
|
|
|
+ # debug5
|
|
|
+ # debug4
|
|
|
+ # debug3
|
|
|
+ # debug2
|
|
|
+ # debug1
|
|
|
+ # log
|
|
|
+ # notice
|
|
|
+ # warning
|
|
|
+ # error
|
|
|
+#search_path = '"$user", public' # schema names
|
|
|
+#row_security = on
|
|
|
+#default_table_access_method = 'heap'
|
|
|
+#default_tablespace = '' # a tablespace name, '' uses the default
|
|
|
+#default_toast_compression = 'pglz' # 'pglz' or 'lz4'
|
|
|
+#temp_tablespaces = '' # a list of tablespace names, '' uses
|
|
|
+ # only default tablespace
|
|
|
+#check_function_bodies = on
|
|
|
+#default_transaction_isolation = 'read committed'
|
|
|
+#default_transaction_read_only = off
|
|
|
+#default_transaction_deferrable = off
|
|
|
+#session_replication_role = 'origin'
|
|
|
+#statement_timeout = 0 # in milliseconds, 0 is disabled
|
|
|
+#lock_timeout = 0 # in milliseconds, 0 is disabled
|
|
|
+#idle_in_transaction_session_timeout = 0 # in milliseconds, 0 is disabled
|
|
|
+#idle_session_timeout = 0 # in milliseconds, 0 is disabled
|
|
|
+#vacuum_freeze_table_age = 150000000
|
|
|
+#vacuum_freeze_min_age = 50000000
|
|
|
+#vacuum_failsafe_age = 1600000000
|
|
|
+#vacuum_multixact_freeze_table_age = 150000000
|
|
|
+#vacuum_multixact_freeze_min_age = 5000000
|
|
|
+#vacuum_multixact_failsafe_age = 1600000000
|
|
|
+#bytea_output = 'hex' # hex, escape
|
|
|
+#xmlbinary = 'base64'
|
|
|
+#xmloption = 'content'
|
|
|
+#gin_pending_list_limit = 4MB
|
|
|
+
|
|
|
+# - Locale and Formatting -
|
|
|
+
|
|
|
+datestyle = 'iso, mdy'
|
|
|
+#intervalstyle = 'postgres'
|
|
|
+timezone = 'Etc/UTC'
|
|
|
+#timezone_abbreviations = 'Default' # Select the set of available time zone
|
|
|
+ # abbreviations. Currently, there are
|
|
|
+ # Default
|
|
|
+ # Australia (historical usage)
|
|
|
+ # India
|
|
|
+ # You can create your own file in
|
|
|
+ # share/timezonesets/.
|
|
|
+#extra_float_digits = 1 # min -15, max 3; any value >0 actually
|
|
|
+ # selects precise output mode
|
|
|
+#client_encoding = sql_ascii # actually, defaults to database
|
|
|
+ # encoding
|
|
|
+
|
|
|
+# These settings are initialized by initdb, but they can be changed.
|
|
|
+lc_messages = 'en_US.utf8' # locale for system error message
|
|
|
+ # strings
|
|
|
+lc_monetary = 'en_US.utf8' # locale for monetary formatting
|
|
|
+lc_numeric = 'en_US.utf8' # locale for number formatting
|
|
|
+lc_time = 'en_US.utf8' # locale for time formatting
|
|
|
+
|
|
|
+# default configuration for text search
|
|
|
+default_text_search_config = 'pg_catalog.english'
|
|
|
+
|
|
|
+# - Shared Library Preloading -
|
|
|
+
|
|
|
+#local_preload_libraries = ''
|
|
|
+#session_preload_libraries = ''
|
|
|
+#shared_preload_libraries = '' # (change requires restart)
|
|
|
+#jit_provider = 'llvmjit' # JIT library to use
|
|
|
+
|
|
|
+# - Other Defaults -
|
|
|
+
|
|
|
+#dynamic_library_path = '$libdir'
|
|
|
+#extension_destdir = '' # prepend path when loading extensions
|
|
|
+ # and shared objects (added by Debian)
|
|
|
+#gin_fuzzy_search_limit = 0
|
|
|
+
|
|
|
+
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+# LOCK MANAGEMENT
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+
|
|
|
+#deadlock_timeout = 1s
|
|
|
+#max_locks_per_transaction = 64 # min 10
|
|
|
+ # (change requires restart)
|
|
|
+#max_pred_locks_per_transaction = 64 # min 10
|
|
|
+ # (change requires restart)
|
|
|
+#max_pred_locks_per_relation = -2 # negative values mean
|
|
|
+ # (max_pred_locks_per_transaction
|
|
|
+ # / -max_pred_locks_per_relation) - 1
|
|
|
+#max_pred_locks_per_page = 2 # min 0
|
|
|
+
|
|
|
+
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+# VERSION AND PLATFORM COMPATIBILITY
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+
|
|
|
+# - Previous PostgreSQL Versions -
|
|
|
+
|
|
|
+#array_nulls = on
|
|
|
+#backslash_quote = safe_encoding # on, off, or safe_encoding
|
|
|
+#escape_string_warning = on
|
|
|
+#lo_compat_privileges = off
|
|
|
+#quote_all_identifiers = off
|
|
|
+#standard_conforming_strings = on
|
|
|
+#synchronize_seqscans = on
|
|
|
+
|
|
|
+# - Other Platforms and Clients -
|
|
|
+
|
|
|
+#transform_null_equals = off
|
|
|
+
|
|
|
+
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+# ERROR HANDLING
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+
|
|
|
+#exit_on_error = off # terminate session on any error?
|
|
|
+#restart_after_crash = on # reinitialize after backend crash?
|
|
|
+#data_sync_retry = off # retry or panic on failure to fsync
|
|
|
+ # data?
|
|
|
+ # (change requires restart)
|
|
|
+#recovery_init_sync_method = fsync # fsync, syncfs (Linux 5.8+)
|
|
|
+
|
|
|
+
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+# CONFIG FILE INCLUDES
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+
|
|
|
+# These options allow settings to be loaded from files other than the
|
|
|
+# default postgresql.conf. Note that these are directives, not variable
|
|
|
+# assignments, so they can usefully be given more than once.
|
|
|
+
|
|
|
+#include_dir = '...' # include files ending in '.conf' from
|
|
|
+ # a directory, e.g., 'conf.d'
|
|
|
+#include_if_exists = '...' # include file only if it exists
|
|
|
+#include = '...' # include file
|
|
|
+
|
|
|
+
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+# CUSTOMIZED OPTIONS
|
|
|
+#------------------------------------------------------------------------------
|
|
|
+
|
|
|
+# Add settings for extensions here
|